Zili | Portable Hot Melt Strapping Machines - Strapping, Threading & Problem Solving

Accompanied by the improvement of science and technology, portable hot melt balers into the various production enterprises, when the enterprise operator to get the active baler will have questions such as, how to load the baler strapping? How to deal with the situation of playing not tight? Don't worry today I will answer these questions for you.

First, portable hot melt baler loading strapping, threading method:

1. Wrap the pp or pet strapping around the bales;

2. With the left hand, align the overlapping parts of the strapping, and with the right hand, lift up the strapping lever to put the strapping into the strapping slot (squeezing the strapping with the left hand and pushing it gently into the innermost part of the slot will help the strapping to achieve the result of uniform positioning quickly);

3. Tighten the baling band (press the tightening button on the top of the electric baler to achieve the desired tightening strength, and then release the switch button) (balers with active mode can complete the tightening and fusing by pressing the No.1 tightening button in the active mode);

4. Fusing strapping (after tightening, press the fusing button, the strapping machine will actively fuse and cut off the excess strapping);

5. Take away the baler (when the fusion is complete, the baler screen green light reminder, or indicator to stop flashing and accompanied by a reminder of the sound reveals that the fusion cooling is complete, then we uplift the baler lever, and to the right side of the baler can be moved across the baler away from the baling band).

Second, portable hot melt balers do not play tight processing methods:

1. First of all, press the baler tightening button, observe the baler whether there is tightening action, if the machine has tightening action reveals that the machine motor, control switches, wiring and other issues (when the tightening wheel does not move, tightening can only be heard when the small motor drive sound is an explanation of the machine within the bevel gear damage).

2. Machine tightening action is to observe the machine is tightening wheel idling or forward sliding state. If the tightening wheel idling can disassemble the machine shell to clean up the belt chips on the tightening wheel or replace the tightening wheel. When the machine appears to slide forward state is to clean up the chips on the lower gear plate or replace the lower gear plate (in particular, you can use the appropriate size of the shims to pad the lower gear plate to use).